Seagull cassutt 3M Racer Spezifikationen PDF herunterladen (Seite 11)

11

www.seagullmodels.com

Battery.

2200mAh-2600mAh.

Speed control.

4) Attach the speed control to the side of the

motor box using two-sided tape and tie wraps.

Connect the appropriate leads from the speed

control to the motor. Make sure the leads will

not interfere with the operation of the motor.

 1) Slide the fiberglass cowl over the motor

and line up the back edge of the cowl with the

marks you made on the fuselage then trim and

cut as shown.

COWLING.

 2) While keeping the back edge of the

cowl flush with the marks, align the front of

the cowl with the crankshaft of the engine. The

front of the cowl should be positioned so the

crankshaft is in nearly the middle of the cowl

opening. Use the spinner backplate as a guide.

Hold the cowl firmly in place using pieces of

masking tape.

122mm.

Epoxy.

Machine Screw M2x8mm.

 3) Use four M2x8mm machine screws to

secure the fiberglass cowling to thefuselage

as shown.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare